AH40 - Technical Data
| Physical Dimensions | 82 mm x 82 mm x 37 mm (H x W x T) |
| Power Supply | 8-24 VDC or Power over Ethernet (PoE) |
| Power Rating |
Power Supply The power supply shall be able to deliver minimum 3.5 W. The power supply shall be 3 A over current protected. PoE IEEE 802.3af compliant class 1 Powered device (PD) |
| Ethernet | 10BASE-T / 100BASE-TX Local Area Network |
| Radio Standard |
IEEE 802.15.4 (2400 – 2483,5 MHz) 16 channels (11-26) 15 channels in USA and Canada (11-25) AES 128 bit encryption |
| Receiver Sensitivity | -100 dBm |
| Wireless Transmit |
Power 10 dBm/MHz according to EN ETSI 300 328. Maximum spectral density. |
| Wireless Operating Range | Indoors up to 25 m depending upon installed environment. |
| Internal Antenna | Two port cross polarized patch antenna. |
| External Antenna | One reverse polarity SMA external antenna connector. AH40 is certified to be used with ASSA ABLOY external antenna AH ANTENNA 1. If other external antenna is used it must be of same type (dipole) and not have larger antenna gain than 3,9 dBi. |
| Operating Temperature | 5 °C to 35 °C |
| Humidity | < 95 % non-condensing |
| IP Classification | IP20 |
| Safety and Emissions |
FCC 47CFR Part 15 subpart B and subpart C IC RSS-210 EN ETSI 301 489-17 v2.2.1 EN ETSI 300 328 v1.8.1 EN 60950-1 2006 / A11:2009 / A12:2011 / A1:2010 / AC:2011 UL 294-2010 |