Selecting EAC addresses for communication hubs and locks correctly during installation is important in order not to cause address conflicts in your installation.
The communication hubs can use different address ranges depending on the installation:
- Address 1-15: For AH30 communication hubs with one or several locks paired and AH15 communication hubs. Address is selected by DIP Switch or the Programming Application.
- Address 16-31: For AH30/AH15 communication hubs in single device mode (only one lock paired). Address is selected by DIP Switch or the Programming Application.
- Address 32-63: For AH30/AH15 communication hubs in single device mode (only one lock paired). Address is selected only by the Programming Application.
The final lock EAC address depends on the communication hub address. For AH15 communication hubs the lock address is equal to the hub address. For AH30 communication hubs the lock address is decided by the addressing table.